Thermal power: 7-58MW
Working pressure: 1.0-1.6 MPA
Output water temperature: 130/70℃, 115/70℃
Applicable Fuel: Coal, Gangue, Biomass, Waste, Sludge
Applicable industry: Heating

Introduction:

CFBC technology, as a new type and matured high efficient, low-pollution and clean coal technology, it has many advantages that other combustion methods do not have.

CFB is a low-temperature combustion, so the helium oxide is far lower than the pulverized coal furnace, only 200ppm approximately. At the same time, it is feasible to actualize direct desulfurizing during combustion, and it has high desulfurization efficiency. The technical equipment is economic and simple. The initial investment for desulfurization and performance cost is a far lower than that of PC+FCD.

Extensive fuel adaptability and high combustion efficiency, especially suitable for low calorific value inferior coal.

The exhausted cinder has better activeness, liable to actualize integrated utilization and free from secondary cinder pollution.

Wide range for road adjustment, low load can be lower to 30% approximately of the rated load.

Technical advantages:

High temperature cyclone separator:

High efficiency, wear resistance, separation efficiency≥98%,effectively improve the combustion efficiency of the boiler thermal efficiency.

Large furnace design:

Large furnace, low flow rate design, allow pipe technology decrease erosive wear.

Extend the residence time of coal particles in the hearth so that the coal can be fully burned.

Bell hood:

Bell hood is used to avoid fuel returning to wind chamber while the air is evenly distributed.

Low bed pressure operation:

Through optimizing the fuel particle, the operating bed pressure can be as low as 3500 Pa, which effectively saves operating costs and greatly reduces the production of NOx.

Parameter:

SHX7-1.0/115/70-A SHX10.5-1.0/115/70-A SHX14-1.0/115/70-A SHX17.5-1.0/115/70-A SHX21-1.25/115/70-A SHX29-1.25/130/70-A SHX46-1.25/130/70-A SHX58-1.25/130/70-A
Rated Thermal Power(MW) 7 10.5 14 17.5 21 29 46 58
Working Pressure MPA 1.0-1.6
Output Water Temperature℃ 115/130
Return Water temperature ℃ 70
Available fuel Kinds of Coal, Gangue, Biomass, Waste, Sludge
Thermal efficiency% 89 89 89 89 89 91 91 91

The company’s strength

The company has advanced production processing equipment and complete testing method. the main processing equipment are serpent tube line, CNC coiler production line, membrane wall line, vertical & circle welding line, steel frame automatic welding line, digital control plasma(flame)cutting machine, CNC drum drilling, high-speed CNC flat surface drilling, high-speed header digital control drilling, 100mm three roller CNC universal binder, intersecting lines digital control cutting, CNC, robot welding equipment, 168 CNC three-dimensional bending equipment, 4 axis NC tube bending machine, 3D laser cutting machine, pipe end forming equipment, 100T universal material testing machine, metallurgical microscope, x-ray detector, hardness tester, spectrum analyzer, large scale heat treatment furnace, sand blasting and painting etc.

SZL Coal-Fired Hot Water Boiler

Read More

SHX series circulating fluidized bed steam and hot water boiler

Read More

SZL series bituminous coal and anthracite steam&hot water boiler

Read More

DZL Series Bituminous Coal/Anthracite Steam&Hot Water Boiler

Read More

SHX sries circulating fluidized bed hot water boiler

Read More

Shenyang third heat Heating Co.

...
Read More

25-ton SZL coal-fired steam boiler project

...
Read More

Qinghai Salt Lake Heiner Chemical

...
Read More

Heilongjiang Kangtai Industry

...
Read More

SZL coal-fired hot water boiler project

...
Read More